Ultraguard vs Paint
A Comparison of the UltraGuard vs. Paint Restoration.
Swimming pool paints have a number of inherent flaws. Most of these flaws are derived from the fact that they are paint and not designed as a high-performance industrial grade swimming pool epoxy resurfacing system. Although paints and industrial coatings are both applied with roller and/or brush there are vast differences in chemistry and physical properties between them. This is why the UltraGuard pool resurfacing system outperforms competing products in every dimension.
Common Pool Paint Problems
- Swimming pool paints are not flexible
- Swimming pool paints are not UV resistant
- Swimming pool paints will Chalk because chemistry formulation issues.
- Swimming pool paints will only last 2 to 3 years.
- Swimming pool paints cannot create a water tight seal
Why Ultraguard is the best solution
- UltraGuard can flex - will not become brittle and cannot delaminate.
- UltraGuard will not chalk within a few years of application.
- UltraGuard will not yellow within a short period of time.
- UltraGuard can be easily recoate.
- UltraGuard never has to be removed because it is the most durable and permanent swimming pool surface in the world.
- UltraGuard gives you a smooth non-abrasive surface that will not roughen over time.
- UltraGuard non-porous and anti-microbial surface will not allow algae to grow.
- UltraGuard does not have to be scrubbed, acid washed or painted EVER!
- UltraGuard requires less swimming pool chemicals and less maintenance saving you effort, time and money.
- UltraGuard provides a waterproof barrier and a new surface that provides structural integrity.
The UltraGuard Difference
- Please read our customer Testimonials. UltraGuard has been used on more than 5000 residential and commercial pools since 2003. Many of these customers turned to UltraGuard after the product they had originally used on their pools failed. UltraGuard has been used by Architects, Engineers and even experts in the painting and coatings industry.
- UltraGuard has the only A+ rating on the internet with the BBB as a DIY and is one of a very few pool resurfacing products listed with Angie’s list.
- UltraGuard has an amazingly low 1.5% failure rate. This would not be possible if it were not the best resurfacing system in the industry.
- UltraGuard is the only coating that has anti-mildew and anti-microbial properties built into the formulation. This prevents algae growth and provides an extra level of sanitation to the pool surface.
- UltraGuard is the lowest VOC pool coating system available with the lowest negative impact to human and environmental health.
Since 2003, UltraGuard has been America’s #1 longest lasting, high quality, tested and proven pool resurfacing system.
We strongly believe that once you have read through all of the information provided on the website, you will not want to buy plaster recoating for your pool, pool paint including an EHB epoxy paint and/or fiberglass re-coating. In many cases they develop issues such as chalking, flaking and blistering within 1 to 2 years.