ChillKote®,
The concrete coating that saves your feet!
Up to 38% reduction in surface temp!
CHILLKOTE DECK COATING KIT
Coat your pool decks, patios, walkways, concrete floating dock walkways, rooftop terraces, and anywhere a cooler, slip-resistant surface is desired.
$339.00
Select Quantity
SKU 57003
NOTE: 1 unit (2 gallons) covers a max of 200 sq/ft with two coats. Two coating layers required
ChillKote Cooling Technology
Making hot pool decks and concrete
surfaces kinder on your feet
Key Attributes
- Up to 38% reduction in surface temp (Lighter colors result in the best reduction of surface temperature)
- Easy to apply with roller and/or paintbrush
- Works on new or aged concrete as well as knockdown finishes like “kool-deck”
- Leaves durable, comfortable slip-resistant finish that’s easy to clean and maintain
- Ultra low vocs and no foul odors
- Quick dry – 30 minutes or less
- 5 year limited warranty
Recommended Substrates
- Concrete
- Masonry
- Asphalt
System Includes
- 5 gallon pail Contents
- Concrete Cleaner
- SealKote
NOT INCLUDED
KORKOTE needs 1 gallon of exterior acrylic latex paint of your choice. Lighter colors result in the best reduction of surface tempter.
ChillKote Installation Instructions
Simple perparation and easy to
apply
Surface Preparation
Surface must be clean and free from any loose debris and/or previous surface coating.
Thoroughly clean bare concrete using ChillKote™ Concrete Cleaner. Previously painted or coated concrete must be thoroughly pressure washed and any loose material must be removed prior to application. Repair cracks over 1/4” with BondKote or another polymeric concrete patching compound (refer to manufacturer’s instructions for proper application).
Please consult a professional if you have any questions about proper surface preparation.
Application
1 ) Apply ChillKote when the Temperature is between 40 and 90° F. Do not apply if rain is expected within 24 hours prior to or 8 hours after application.
2 ) Apply material by pouring a small amount onto the concrete in an “S” pattern. Quickly spread and roll out evenly with a ¾” nap roller. Repeat process for both first and second coats (only apply second coating after the first has completely dried). Avoid leaving roller marks when applying the material.
3 ) After second layer of ChillKote has completely dried, apply our specially formulated nano sealer, SealKote. Using a 1.5” nap roller, apply one layer of SealKote. Let dry and then apply second layer.
!!!Caution!!!
1 ) Do not apply over sealed concrete.
2 ) A sealer that is resistant to hot-tire-peal must be used in applications involving vehicles. See complete instructions.