KORKOTE needs 1 gallon of exterior acrylic latex paint of your choice. Lighter colors result in the best reduction of surface tempter.
Surface must be clean and free from any loose debris and/or previous surface coating.
Thoroughly clean bare concrete using ChillKote™ Concrete Cleaner. Previously painted or coated concrete must be thoroughly pressure washed and any loose material must be removed prior to application. Repair cracks over 1/4” with BondKote or another polymeric concrete patching compound (refer to manufacturer’s instructions for proper application).
Please consult a professional if you have any questions about proper surface preparation.
1 ) Apply ChillKote when the Temperature is between 40 and 90° F. Do not apply if rain is expected within 24 hours prior to or 8 hours after application.
2 ) Apply material by pouring a small amount onto the concrete in an “S” pattern. Quickly spread and roll out evenly with a ¾” nap roller. Repeat process for both first and second coats (only apply second coating after the first has completely dried). Avoid leaving roller marks when applying the material.
3 ) After second layer of ChillKote has completely dried, apply our specially formulated nano sealer, SealKote. Using a 1.5” nap roller, apply one layer of SealKote. Let dry and then apply second layer.
1 ) Do not apply over sealed concrete.
2 ) A sealer that is resistant to hot-tire-peal must be used in applications involving vehicles. See complete instructions.