HAVE A FIBERGLASS POOL? CLICK HERE FOR OUR FIBERGLASS WEBSITE
ULTRAGUARD AC vs. FIBERGLASS
Your Options are: Paints, Plaster, Marcite or Fiberglass
Let’s Compare our UltraGuard AC to a Fiberglass Restoration.
- Both Fiberglass and UltraGuard are two part systems which use a catalyst which creates a membrane with specifications greater than 14,000 psi compressive strength.
- Both Fiberglass and UltraGuard are structural shells that stop all leaks.
- Both Fiberglass and UltraGuard never need wire brushing and never need acid washing.
- Both Fiberglass and UltraGuard have a surface that permanently stays smooth, which means no cut or scuffed feet.
- Unlike Fiberglass UltraGuard is non-porous where algae cannot cling and usage of chemicals is reduced nearly 50% the UltraGuard will not chalk but the gel coat will.
- Unlike Fiberglass gel coat UltraGuard is an inert coat that won’t interact with the chemicals and pool substrate which causes failure of other topcoats.
- Unlike Fiberglass gel coat only UltraGuard is a Hi-Tech industrial coatings that can withstand harsh chemicals and are resistant to staining and blemishes.
THAT IS WHERE THE SIMILARITY STOPS!!!
Unlike UltraGuard, Fiberglass does not flex and will fail, pop off and delaminate especially under the tile, skimmer, returns, bottom drains, wherever fiberglass ends.
Unlike UltraGuard, Fiberglass is extremely difficult to install. In the fiberglass industry, journeymen and apprentices are never allowed to apply fiberglass unless they have had years of experience. This is not true of UltraGuard where previous experience is not necessary.
Unlike UltraGuard, Fiberglass upon application will wick (dry areas) which causes the permeation of the pool water and starts the process of failure by delamination.
Unlike UltraGuard, Fiberglass has no chemical bond. It gives a physical bond at best and that is questionable.
UltraGuard has a 2,000 PSI bond which becomes and integral part of the pool shell.
Unlike UltraGuard, Fiberglass is not an elastomeric membrane.
Unlike UltraGuard, Fiberglass’s gelcoat has a maximum life expectancy of 5 to 6 years. It is only a Paint! Ask any Boat Owner!
Unlike UltraGuard, which offers 6 different colors, the gel coat of Fiberglass will streak if dark colors are used. That’s why they recommend only white.
Why do other manufactures products chalk within one and two years?
Why are all other pool websites making claims to longevity which are lies?
Why other manufactures since 2003 have not met the UltraGuard challenge?
PLEASE REMEMBER OUR TESTIMONIALS HAVE BEEN UP SINCE 2003 AND THE 5000 CUSTOMERS WE HAVE SOLD HAVE ALL BOUGHT ULTRAGUARD IN DESPERATION, BECAUSE THE PRODUCT THEY HAD ON THEIR POOL FAILED.
UltraGuard has the only A+ rating on the internet with the BBB as a DIY.
We would not have the testimonials that are 8 to 14 years old. Some of these testimonials are from architects, engineers and even paint chemist.
UltraGuard is the only product listed with Angie’s list on the Internet because of the track record and perfect history that we have.
We would not have an amazing 1 ¼ % failure rate with our customers if UltraGuard were not the best pool product in the industry today.
We would not have the customer satisfaction if UltraGuard were not the best pool coating in the industry today.
UltraGuard is the only product that can repair a major structural crack that was caused by an earthquake.
UltraGuard is the only coating that can stop algae from growing because our microban will resist the growth because of its anti-microbial properties but of course you must know when to shock your pool.
If you read my website you will not buy a plaster recoating for your pool, you will never buy a pool paint including an EHB epoxy paint. You will not buy a fiberglass re-coating that has a gel coat because it will not last and will start chalking within 1 or 2 years. My website tells you in great details why these products all fail within a few short years.
UltraGuard has been certified by an agency that will tell you we are 100% green and the only product in the pool industry that has this certification.
Do you still wonder why my competition would like to take out a contract on me and get UltraGuard off of the Internet? They want to put me out of business but they never will.
Our DIY pricing is based on the thickness of the product.
UltraGuard 6000 UltraGuard 4500 UltraGuard 3000
2 coats 40 mils plus 1 coat 20 mils plus 1 coat 10 mils plus
Longevity Longevity Longevity
20 to 24 years 10 to 12 years 5 to 7 years
We have a price range for any budget that you may have. Click here for your prices
Since 2003 UltraGuard had been America number 1 long lasting, quality, tested and proven coating. Recognized by the Better Business Bureau with the longevities listed above.
Click Here to Find Out why you MUST have a Primer Bond Coat.
All offices of National Distributors that sell a DIY are independently owned. They have the right to offer different warranties and different prices.
UNUSED MERCHANDISE CAN NOT BE RETURNED! *SHIPPING IS ADDITIONAL
DID YOU FILL OUT OUR 2-MINUTE QUESTIONNAIRE BETTER TO SERVE YOU? CLICK HERE
DID YOU LISTEN TO TONY’S 3 AND KEN’S 4 MINUTE VIDEO AND BECOME AND EDUCATED CONSUMER?
DID YOU READ FIBRELINER, UGLASSIT, FIBER SHELKOTE AND ALL PAINTS INCLUDING EHB EPOXY PAINTS COMPANIES YOU SHOULD NOT BUY FROM AND WHY THEIR PRODUCTS FAIL?
PLEASE DO NOT CALL US UNTIL YOU HAVE!