Our Social Media
Read Our Blog



Ultraguard on Facebook


POLY-ONE COAT

Poly OneCoat is not a reliable product.

The information you are about to read about Poly One is not complimentary to their product.

The failures they have had prove that Poly One is nothing more than a glorified paint.

-----Original Message-----
From: Kevin Moore MEIJIA [mailto:k.moore@meijiaproducts.com]
Sent: Friday, July 10, 2009 1:27 PM
To: 'kenbankoff@poolrestoration.com'
Subject: testimonial

TESTIMONIAL:

I just refinished my pool with Ultraguard on Jun 20, 2009. The Sky blue color looks awesome. I have already had two failures from using the Ultra Poly One Coat product. Poly One's product is very heavy (I wonder if it contains fillers). Over time, after 2 separate applications one year apart, their product kept "chalking" my pool surface (white residue all over the surface of the pool and cloudy water). Polyone tried to blame it on water chemistry, my water is not hard and always tests fine at the pool store. I also had some delaminating of the Poly One coating on the floor in the shallow end.

Ultra Poly One Coat requires 5 days drying time and that you add acetone to their mix--essentially making a paint. I believe Ultraguard to be a superior product. It goes on thicker, the color is much nicer, the drying/curing time is very short, you don't add acetone to the mix, there are no fillers, and the customer service walks you through every step of the process. Thanks for all your help!

Kevin Moore
Ft Worth, TX

READ MORE BELOW...

We have obtained Poly One's 15-year warranty. It is not worth the paper it's written on. If you email us we will fax you a copy of it.

Thanks for speaking with me about why my pool is loosing its bottom. Here are the pictures I told you I would send. The pool was resurfaced in Feb / Mar of 2005 with Poly One Coat by a pool company in North Carolina. In July 2006 I began to see pieces of the bottom coming up from the pool around the steps. I drained the pool in April of 2007 to access the amount of damge and this is what I found. Just about all the way across in front of the steps the Poly One Coat surface bottom has come up from the pool. Also in other areas of the pool the same thing is occuring. The picutre of me holding the sheet is from the slope going towards the deep end of the pool. I have been a certified pool operator for 7 years and have been around pools as a lifegaurd for an additional 4. I have never seen anything like this in all my experience. Any recommendation yo have for me would greatly be appriciated.

Brian Matthews

Before UltraGuard Before UltraGuard Before UltraGuard Before UltraGuard

 

© Copyright 2010 Ultraguard Swimming Pool Resurfacing, All Rights Reserved. Change to Site Maintained and Updated by Ultraguard